Service

service

Projects

project

SOA

logo-soa

Quality

quality

Description

aluminium - wood frames are composed by an external aluminium profile and by an internal wood profile. Between the two profiles, there is a continuous seal in thermoplastic material which avoids the contact of wood with the aluminium and it allows the enlargement of materials.

Description

it is the traditional window. The opening/closing of the frame is accomplished by rotating the handle to 90°. A casement window can be opened internally or externally, depending on its realization. This frame can be formed by one, two and three shutters. The thermal break systems represent the most efficient answer to the current need of thermal insulation (warm and cold) and to the specific need to optimize the esthetic, functionality and durability characteristics, besides the energy saving.

Features

Size of the base: from 50 to 60 mm Kind of hold air-water-wind: opened joint (window and French window)
Depth of the glasses: from 4 to 42 mm
Esthetic lines: flat, shaped, radiated, round

Performances:
Watertight  EN 1027 – EN 12208: 9A
Permeability to the air EN 1026 – EN 12207: 4
Resistance to the wind EN 12211 – EN 12210: 5
Sound proof power EN ISO 140-3 – EN ISO 717-1: Until 46 dB
Resistance to the forcing EN 1627 – EN 1630: WK2


Size of the base: from 65 to 85 mm
Kind of hold air-water-wind: opened joint (window and French window)
Depth of the glasses: from 14 to 58 mm
Esthetic lines: flat, shaped, radiated, round

Performances:
Watertight  EN 1027 – EN 12208: 9A
Permeability to the air EN 1026 – EN 12207: 4
Resistance to the wind EN 12211 – EN 12210: 5
Sound proof power EN ISO 140-3 – EN ISO 717-1: Until 43 dB
Resistance to the forcing EN 1627 – EN 1630: WK3


Size of the base: from 75 to 95 mm
Kind of hold air-water-wind: opened joint (window and French window)
Depth of the glasses: from 24 to 68 mm
Esthetic lines: flat, shaped, radiated, round

Performances:
Watertight  EN 1027 – EN 12208: 9A
Permeability to the air EN 1026 – EN 12207: 4
Resistance to the wind EN 12211 – EN 12210: 5
Sound proof power EN ISO 140-3 – EN ISO 717-1: Until 43 dB
Resistance to the forcing EN 1627 – EN 1630: WK2

Accessories

In these types can be installed the turn and tilt mechanism which allows to keep the window opened without the risk that currents of air move the doors. However, for windows with more doors, the service door is only with the horizontal opening.


Description

This system can be adapted to the flats and it is a perfect balance between solidity and lightness of the profiles. The quality of the components and their features allow to realize frames with great performances and an elegant and functional product. The monobloc is constituted by the union of three essential elements: window and door frames, rolling shutter box and window shade. The assembly of these three elements is made with care to obtain the best performances of the frame. The union points between the profiles are well sealed to protect them, preventing air and water infiltrations and corrosion phenomena. The rolling shutter boxes are composed by a self-extinguishing polystyrene lather at high density, zinc-coated steel structure, shaped top part with cavities, lateral façades plaster holder with surfaces in many solutions for an excellent cohesion with any kind of plaster, and inferior edges with reinforced aluminium profiles. These rolling shutter box have both thermal and acoustic performances. In addition there is the possibility to utilize the "rollaway shutter box". The rolling shutter box installed in the monobloc window can realize in PVC or in caulked Aluminium, with both automatic and manual operation mechanisms.

Features

Size of the base: from 50 to 60 mm
Kind of hold air-water-wind: opened joint (windows and French windows)
Depth of the glasses: from 4 to 42 mm
Esthetic lines: flat, shaped, radiated, round

Performances:
Watertight  EN 1027 – EN 12208: 9A
Permeability to the air EN 1026 – EN 12207: 4
Resistance to the wind EN 12211 – EN 12210: 5
Sound proof power EN ISO 140-3 – EN ISO 717-1: Until 46 dB
Resistance to the forcing EN 1627 – EN 1630: WK2


Size of the base: from 65 to 85 mm
Kind of hold air-water-wind: opened joint (windows and French windows)
Depth of the glasses: from 14 to 58 mm
Esthetic lines: flat, shaped, radiated, round

Performances:
Watertight  EN 1027 – EN 12208: 9A
Permeability to the air EN 1026 – EN 12207: 4
Resistance to the wind EN 12211 – EN 12210: 5
Sound proof power EN ISO 140-3 – EN ISO 717-1: Until 43 dB
Resistance to the forcing EN 1627 – EN 1630: WK3


Size of the base: from 75 to 95 mm
Kind of hold air-water-wind: opened joint (windows and French windows)
Depth of the glasses: from 24 to 68 mm
Esthetic lines: flat, shaped, radiated, round

Performances:
Watertight  EN 1027 – EN 12208: 9A
Permeability to the air EN 1026 – EN 12207: 4
Resistance to the wind EN 12211 – EN 12210: 5
Sound proof power EN ISO 140-3 – EN ISO 717-1: Until 43 dB
Resistance to the forcing EN 1627 – EN 1630: WK2

Accessories

In these types can be installed the turn and tilt mechanism which allows to keep the window opened without the risk that currents of air move the doors. However, for windows with more doors, the service one is only with the horizontal opening. Another accessory that can be installed to obtain a total comfort is the motorized window shade.

Description

the optimization of the space, residential or working, is the main target of any planning and it demands a knowledge of the functions to allocate and of the characteristics of the products to install, both for the elements of the constructive process and for the furniture. During the research of solutions to exploit the surfaces it needs to be careful to the placement of the frames and inside doors, if they are swing doors, because the space uses for the operation of opening is useless. The best choice to optimize the free space is to choose sliding systems, moving parts of the frames that slide in parallel way to the length of the same frame, in some cases with a small advanced or backward deviation caused by the skidded position of the track. Otherwise an hidden system, in the case of creation of blind compartment at wall.

There are many kinds of sliding frames:


 Lift sliding window, is the best solution for people who want to value the style of their house. This type is constituted by a floor track where the doors slide and it represents an advanced system of the sliding glass walls environment. The system can be realized with handle and key for the outside opening/closing.


 Sliding window, can have two, three or four doors. It needs to turn the handle at 90° to open and to slide the door laterally until the desired position. It can have also the electric mechanism of opening. Above all it is utilized in the residential context. As French door is used like entrance in balconies and terraces. The thermal break systems represent the most efficient answer to the current need of thermal insulation (warm and cold) and to the specific need to optimize the esthetic, functionality and durability characteristics, besides the energy saving.


 Traverse sliding system, is the best for the closing of big or small glass walls. It allows to respect some parameters of current regulations as, hold to the wind and water, thermal and acoustic insulation, hermetic, bright. One of the main characteristics of the sliding window is a fixed door and a moving door: this one can be opened, both like a folding door turning the handle at 180°, and sliding a door until the overlapping with the other one, like a traditional sliding window, turning the handle at 90°.

Features

Lift sliding window

Size of the base: 140 – 150 mm Kind of hold air-water-wind: through seal EPDM or brush seal Depth of the glasses: max 43 mm Maximum load for each door: 300 Kg 


Performances:
Watertight  EN 1027 – EN 12208: E1050 Permeability to the air EN 1026 – EN 12207: Resistance to the wind EN 12211 – EN 12210: A4 Thermal insulation Uw W/m2 K*: 1,3



Sliding window


Size of the base: 50 – 68 - 98 mm Kind of hold air-water-wind: through brush seal Depth of the glasses: max 28 mm Maximum load for each door: 160 Kg

Performances:
Watertight  EN 1027 – EN 12208: 5A Permeability to the air EN 1026 – EN 12207: Resistance to the wind EN 12211 – EN 12210: A2 Thermal insulation Uw W/m2 K*: 1,6


Size of the base: 100 - 120 mm Kind of hold air-water-wind: through seal in Elaprene and brush seal Depth of the glasses: max 32 mm Maximum load for each door: 200 Kg

Performances:
Hold to the water EN 1027 – EN 12208: 8A Permeability to the air EN 1026 – EN 12207: Resistance to the wind EN 12211 – EN 12210: A3 Thermal insulation Uw W/m2 K*: 1,5



Traverse sliding system


Size of the base: from 50 to 60 mm Kind of hold air-water-wind: opened joint Depth of the glasses: from 4 to 42 mm Esthetic lines: flat, shaped, radiated, round

Performances:
Watertight  EN 1027 – EN 12208: 9A Permeability to the air EN 1026 – EN 12207: Resistance to the wind EN 12211 – EN 12210: Sound proof power EN ISO 140-3 – EN ISO 717-1: Until 46 dB Resistance to the forcing EN 1627 – EN 1630: WK2 


Size of the base: from 65 to 85 mm Kind of hold air-water-wind: opened joint Depth of the glasses: from 14 to 58 mm Esthetic lines: flat, shaped, radiated, round

Performances:
Watertight  EN 1027 – EN 12208: 9A Permeability to the air EN 1026 – EN 12207: Resistance to the wind EN 12211 – EN 12210: Sound proof power EN ISO 140-3 – EN ISO 717-1: Until 43 dB Resistance to the forcing EN 1627 – EN 1630: WK3 



Size of the base: from 75 to 95 mm Kind of hold air-water-wind: opened joint Depth of the glasses: from 24 to 68 mm Esthetic lines: flat, shaped, radiated, round


Performances:
Watertight  EN 1027 – EN 12208: 9A Permeability to the air EN 1026 – EN 12207: Resistance to the wind EN 12211 – EN 12210: Sound proof power EN ISO 140-3 – EN ISO 717-1: Until 43 dB Resistance to the forcing EN 1627 – EN 1630: WK2

Accessories

On the lift sliding window, it can be installed the automation that allows to mechanically move only a door, while the other one can be opened manually.

Description

the fixed is a window which can't be opened, utilized only to light up the space. For this reason it is important to consider the possibilities of cleaning. The fixed window can have a round, rectangular or squared form. The thermal break systems represent the most efficient answer to the current need of thermal insulation (warm and cold) and to the specific need to optimize the esthetic, functionality and durability characteristics, besides the energy saving. With a big choice of systems we are asked to satisfy lots of necessities.

Features

Size of the base: from 50 to 60 mm
Kind of hold air-water-wind: opened joint (windows and French windows)
Depth of the glasses: from 4 to 42 mm
Esthetic lines: flat, shaped, radiated, round

Performances:
Watertight  EN 1027 – EN 12208: 9A
Permeability to the air EN 1026 – EN 12207: 4
Resistance to the wind EN 12211 – EN 12210: 5
Sound proof power EN ISO 140-3 – EN ISO 717-1: Until 46 dB
Resistance to the forcing EN 1627 – EN 1630: WK2


Size of the base: from 65 to 85 mm
Kind of hold air-water-wind: opened joint (windows and French windows)
Depth of the glasses: from 14 to 58 mm
Esthetic lines: flat, shaped, radiated, round

Performances:
Watertight  EN 1027 – EN 12208: 9A
Permeability to the air EN 1026 – EN 12207: 4
Resistance to the wind EN 12211 – EN 12210: 5
Sound proof power EN ISO 140-3 – EN ISO 717-1: Until 43 dB
Resistance to the forcing EN 1627 – EN 1630: WK3


Size of the base: from 75 to 95 mm
Kind of hold air-water-wind: opened joint (windows and French windows)
Depth of the glasses: from 24 to 68 mm
Esthetic lines: flat, shaped, radiated, round

Performances:
Watertight  EN 1027 – EN 12208: 9A
Permeability to the air EN 1026 – EN 12207: 4
Resistance to the wind EN 12211 – EN 12210: 5
Sound proof power EN ISO 140-3 – EN ISO 717-1: Until 43 dB
Resistance to the forcing EN 1627 – EN 1630: WK2